Gigi 2 by Lelo

Lelo Sona Cruise

New from Lelo, the Sona Cruise is a sonic clitoral massager. While you certainly get suction from the unique opening on the toy, the Sona Cruise does more than just stimulate the external bits.

Using sonic pulses (just like sonar!) the Sona Cruise is actually designed to stimulate the entire clitoral structure, meaning the internal parts as well as those you can see.

Unique to the Sona, Cruise Control is a feature that reserves 20% of its full power during normal use, so that when it?s pressed hard against the body and the motor begins to drop power, that extra 20% is unleashed so that there?s no reduction of intensity. Best of all, this function is completely automatic!

WARRANTY: 1 year warranty against manufacturer’s defects

DIMENSIONS: 4.5″ x 2″ x 2.2″

More on How To Choose


Generic Care Information

Owner's Manual

SPECIAL INSTRUCTIONS:(1) Generation 2 Lelo vibes are waterproof but make sure the charging socket is closed up before using in or around water. (2) Not compatible with silicone lubes. Soap and warm water applied with a damp cloth (washing away from the control panel) will clean silicone sufficiently. You may use an adult toy cleaner, though unnecessary. (3) NEVER use oil-based lubricants. These will degrade polypropylene and hard ABS plastic shells like the control base on your vibe. (4) The vibe has a lock to prevent accidental activation – a handy feature while passing through customs. (5) This vibe is not recommended for anal use – it lacks a sufficient base for safety.

Charger troubleshooting: (1) Vibe must be on “Lock down” before being charged. This means it must be fully drained and the only way to know that it is totally down for the count is to ensure that the red light comes on when you try to power it. (2) When the red light comes on find a spot that offers an ideal charging environment (where it won’t get nudged or bumped during the charging period … so that the charger plug stays put) and then make sure to fit the charger plug securely into your power socket. It shouldn’t be dangling; it should be plugged in. (3) Then plug the charger into your vibe and make sure the connection is tight. The area where the red light was visible should now be flashing a blue/white light … this is ideal. (4) Sometimes it takes a few minutes for the toy to recognize the charger as the nature of its motor is to “wake up” the battery with a low/slow initial charge before it goes “gangbuster”. If the battery charge light does not “flash” try holding the control pad down for a few seconds… watch the light come on and then turn off, now it’s on lock down and is charging. (5) Final Note: We did find one toy whose light didn’t flash, but it did hold a charge so do wait for the full three to four hour charging period to see if the toy has picked up its charge before concluding that you are out of power.